Finally figured out the final problem that was preventing my quarter-window from fully closing. The lower bead on the aftermarket inner belt molding weatherstrip is thicker than the original by about .03” and It was enough to catch the lower glass frame and preventing it from closing the last .25”.
The picture shows how much had to be trimmed to clear the interference. Dremel cutting wheels sure are handy at times.
I received the two clips and striker bolts for the door
latches that are on order. I also received an invoice surprise that I hope can
be negotiated! The parts are small enough to have come in a single padded
envelope, but they arrived in three individual cardboard boxes approximately 6”x6”x8”,
and strapped with nylon. Each box weighed 4-5 ounces, and the “freight” charge
was $25.66 for each box! The individual price for four clips was .64 cents, and
the pair of striker bolts was less than $6.00.
The estimated date for the latches is still a couple of
weeks away, so it will be interesting to see if they adjust the shipping costs to
parcel post prices when they invoice the entire order. There is no way I’m
paying over $100.00 “freight” on less than two pounds of parts shipped through
the post office.
No comments:
Post a Comment