Search This Blog

Wednesday, April 13, 2016

Shifter Decision


The pushbutton shifter option won’t happen for now. If and when I get the car running and licensed I’ll see if I can make the buttons easier to shift, but my first priority is to make faster progress on the things that can be accomplished.
The decision to go with a floor shift meant I had to clean and paint the manual shift version of the upper dash board, and I completed that this morning. Now I need to make progress on as many of the firewall and under-dash tasks as possible.



Holes in the firewall for the AC lines and heater hoses are cut, and I finished mounting the evaporator. The wire bundle pass-through hole size and location still needs to be established, but I’m first going to order the switches and console relay/fuse panel, to help determine what wiring can stay inside and how much will go through the firewall.

The stoplight switch on the stock ’56 is hydraulically operated and mounted on the master cylinder, but that has been changed to a disc/drum dual reservoir system. For the new setup I used the switch from a ’79 Aspen and designed a bracket to mount it under the dash to be mechanically operated by the brake pedal.

I did get more wiring installed on the dash bundle, but progress is slow. It’s very time consuming and confusing trying to meld and configure wire bundles from ’56, ’64, ’65, ’66, ’81 and 2001 Mopars, a full set of aftermarket gauges, a modern sound system with GPS, relay controlled headlights, power seats, power windows, and all the non-stock interior lighting and wire routing. It will have roughly three times as many circuits as the stock ’56 Belvedere, so it will require both battery and switched 12 VDC busses for fuses under the hood and inside the console. The battery will be relocated in the trunk to make room under the hood for the relay panel, and for better weight distribution, so that adds a new dimension to the wiring. I’m nearing completion of the dash wiring, and even got the GPS antenna mounted atop the new dash. It's ugly, but necessary.

I visited the upholstery shop and told him I’d like to have the seats about the first week in May, but it remains to be seen if I will be ready for them, or if he completes them by then.

Monday morning I took the rear bumper wings and windshield wiper bezels in to be re-plated. The highly rated shop I originally planned to use in close-by Gainesville apparently shut down, so I had to locate another place in Fort Worth. They quoted a fair price, and the shop was neat and organized, so I have my fingers crossed. He wasn't excited about having to do the pot metal bezels, but if he can plate them with no more defects than were visible up on my repair and polish job, I'll be happy. More and more plating shops around here are closing rather than spend the money to comply with federal law, and those that have survived have really jacked up the prices.
I picked up two pairs of 5-1/2" Kenwood speakers so I could install the wiring, then discovered they only included 12" of wire for each speaker! I managed to scrounge up 50' of speaker wire, so at least got that part covered

Tuesday, April 5, 2016

Stolen Moments


Getting closer to having some time to work on the car. I did manage to dodge yard work for a couple of hours and used that opportunity to finish the AC ductwork needed to install a third vent above the console where air can be directed as needed. It's not fancy, but the visible part will receive some bling so it matches the dash


I also spent a short time wiring the dashboard after deciding where to locate the inside fuse panel. Because of the tight quarters behind the dash, I picked the next best location for easy access…below the arm rest storage bin in the console.


I’m now about 99% sure that I will use a floor shifter instead of agonizing over the pushbutton problems. When I finish my honey-do list and have some free time again, I’m going to try a couple of things to see if I can make the buttons easier to operate, but if they don't work, it’s full speed ahead on the floor shifter.

Tuesday, March 29, 2016

Have You Ever Seen The Rain?

With car progress on hold for a few days, I'll offer another musical interlude.

Though my impressionable youth was lived mostly in the days when performers got haircuts and dressed up, there were a few during the crossover era when talent and good music still reigned, but the hippie look became the uniform of the day. This group was probably the best example of the looking ugly, but singing great!



 



Friday, March 25, 2016

Checking In


Tax time and spring yard work has taken priority over fun time in the garage, so nothing of importance is happening with the Plymouth. I did get most of the flower beds cleaned and tilled, and today I have to order 12 yards of hardwood mulch to finish them. With my bad back, that part of the job will take several days to complete, as shovels and wheelbarrows do a real number on it. I hate when real work interferes with fun work!

The lighter weight sheet metal I ordered arrived a few days ago, so I can get started on the console structure and AC ducts once I get my tax info to the preparer, and the mulch spread.

After that is done, I think the next project will be determining a location for the terminal strips and interior fuse block so I can begin running wire from the back of the car. The firewall is quickly running out of accessible space, so maybe I can fit them in below the armrest storage bin.

Thursday, March 17, 2016

Console and Shifter Issues


If there was a way to record and measure the amount of time expended on highly modified projects such as my ’56 Plymouth, I think it would reveal that it required at least ten times as much time to plan and to contemplate, as to do the actual work. Simple restorations are lots of physical labor, but factory parts are available by part number and the non-production time is mostly spent trying to locate those parts.

When we choose instead to restructure and modify a car for whatever reason, it’s a constant challenge to find substitute parts to replace or improve upon the OEM version. When we also choose a project vehicle that is not among the enthusiast’s favorite models, there is virtually no aftermarket support for parts and materials, and the option is often to make them yourself, or have someone make them to your design.  

While designing and fabricating some parts is a simple job, others require extensive planning, are labor intensive and often require testing several iterations before it works properly and/or looks right. Since my fixation is to emulate a style that “might” have been created in a factory design studio, I often go overboard in building, changing and then changing again, before I’m satisfied with the results. The center console is my latest frustration.

If your read some of my earlier posts, you know that my original intent was to modify a two speed pushbutton shifter pod without a Park feature, to operate a later three speed version of a A-727 transmission that is shifted with various lever designs, and to incorporate a Park lever adjacent to the shifter pod. I was successful in creating a shifter that does the job, but I’ve not been able to get it to operate with moderate enough finger-force to make it practical. I could have used an earlier transmission that used a cable to shift, but it didn’t meet my desire to create something totally different. Now that I’ve spent many, many days to design, test, redesign and test some more, I’m faced with the possibility that I don’t have enough time to resolve the remaining problems and get the car on the road by this time next year. That means that the console design I had originally planned must be modified to allow a ’65 Valiant floor shifter to be used…if I decide to go that way.  I’ve spent the better part of two days figuring out how to incorporate the shifter housing into the console design, yet be pseudo-stock appearing either with the shifter installed, or without…if I find the time and talent to resolve the pushbutton force issues.

I made a rough cardboard mockup of the basic console design, and incorporated the ductwork needed to add a third A/C vent below the dash. From that crude design, I’m able to determine accurate dimensions, so now I’m waiting for the 20 and 22 gage sheet metal to arrive so I can begin work on the real console.

Thursday, March 10, 2016

Interior Door Panels

I stopped by the upholstery shop today and picked up the door panels he completed. I had been worried about the color mix, but I really like it. It's not much like the OEM Fury interior, but since my car is highly modified, I prefer it over the somewhat orange tone of the original.
Now I have to decide what to use for arm rests and door handles. I'm still planning on power windows, but need to select the switches and decide where they should be located. There will also be a 2" wide diagonal strip of stainless to separate the black vinyl from the patterned fabric.

I finished forming, but still have to paint, the metal Heater/AC duct adapters for the defrosters and the crossover from the unit to the driver's side vent, but also need something to route the air across the console to the floor, as there's not enough room below the glove box to use flexible hose. The duct will have to be wide and nearly flat to clear everything, or I might design the console with the hose routed inside.

Friday, March 4, 2016

Wiring and A/C Plumbing

Not much accomplished since the doctor's orders to limit physical activity. I've tried to concentrate on finishing my wiring diagrams, but it's been a much more complicated project than expected.

I've done some wiring on the dash, but first have to determine clearances for everything that needs to fit behind it. The centrally located glove box really eats up the space if I intend to keep it the stock size, and the new radio eats up more space than expected.

I'm mocking up the AC ducts and hose layouts so I can get a better idea how to route the wire bundles and where to locate the connector breakouts so they are easily accessed when the dash and console are installed.

New bushings for the windshield wiper pivots arrived, so that's another light job I can work. I decided that I could do a better job of prepping the bezels before having them re-chromed, so I spent a couple of hours sanding and polishing and they do look better now. Compared to the original condition, they look pretty good!


I also have a few other parts that need re-plating, so I'll call the shop next week and find out when I can bring them in.

I stopped in to check on my seats and they are making good progress, but I told him to take his time and put any hot jobs ahead of them. As anxious as I am to see the finished product, I really won't need them until sometime this summer.

Monday, February 22, 2016

Catching Up and Slowing Down


The parts arrived from Vintage Air, so I decided to concentrate my efforts on the firewall while I still have easy access.

 Because of the curved design of the vent system under the dash the condenser will not fit flush against the fire wall, so once again I had to cut and bend sheet metal to make an adapter for the AC parts. Making the adapter was simple enough, but very time consuming.


I also mounted the Delphi Weatherpack firewall connector. It looks odd, but the quality is far better than the typical OEM part usually found in that application.

I had a chance to connect some of the upgraded wire I ordered and while it’s very high quality, it’s almost impossible to remove the insulation with the typical strippers found on inexpensive crimp tools.  That means I finally had a good reason to order a Stripmaster squeeze-type wire stripper for gauges 16-26, and it works wonderfully! It won’t work on the larger wire sizes, but I have a coax stripper that will do the job for those few sizes. The additional wire I had on order also arrived so I now have enough different colors and sizes to finish wiring the dash.

Unfortunately, due to some minor surgery, I’m going to be limited in what I can do for at least the next two weeks, so progress will once again slow down.  In the meantime I can order more parts and design a few of the things I’ve put on the back burner.
Got a call from the upholstery shop and everything is in work with an estimate of a week to ten days to complete. I hope it actually takes a little longer as the doctor ordered no heavy lifting and those seats are heavy

Saturday, February 13, 2016

Some Good News...More Bad


After nearly two days without Internet, it’s clear how vulnerable we would be if terrorists dispense with the shooting and concentrate on disrupting communications!

It’s been a good news, bad news week, so first the bad news.

I worked on the transmission end of the shifter setup and it’s not looking good for using the pushbuttons to shift. The mockup shifter worked fine, but after remaking it from the heavier material required for everyday operation, the force required to push the buttons  has become excessive. Part of the problem is in the cable design, so before giving up, I’ll try to find a smoother operating cable. I might also need to install a bearing in at least one of the pivot points. I don’t really like that idea as the shifter area is too open to mud and other debris, and a sealed bearing is a bit of overkill.

Before wiring the dash, I temporarily hung it in place to determine the best wire harness routing and to check for any interference issues. I’m glad I did as I discovered the new radio touched the windshield wiper motor. I can get about a quarter inch more clearance by modifying the mounting position, so I worked on that yesterday. If that doesn’t provide enough room, I can get a bit more with a small tweak to the wiper motor mount.

Another small issue is the water pump. With the stock replacement pump installed, the timing mark is nearly obscured by the position of the lower hose, so I decided to order a later model pump with the hose breakout on the opposite side. That pump arrived yesterday, but I quickly learned that it created a different problem. Now the ’66 alternator bracket won’t fit, as the new pump is missing a location for one of the bracket mounting bolts. I might also have to either use a later model timing marker and remark the damper, or locate a different bracket. I’ll need some more think-time for that one.
The last unwanted discovery occurred when I installed the oil pressure sender that was provided with the new gauge set. It interferes with the unique design of the aftermarket Chrysler Power intake manifold, and as I’m not ready to machine a notch in the manifold, a change in the sender mounting is in order. That problem goes on the back burner for a while.

After the rash of new problems, I decided to try something else, so I took on the job of installing the suspended accelerator pedal. I had previously made that mod to my ’73 D100 and ’64 Valiant without any problems as I was able to bolt them directly to the firewall by doing nothing more than drilling new holes. I suspected more would be needed on this car, and I was right. To get it located in the proper position I had to design a new bracket to accommodate the angled firewall. While the multi-angle bracket was a pain to make the pedal is now installed. That job reminded me that I have to send Gary Goers my old brake pedal core so he can mold a new one.

With the dash installed, I was able to make a cardboard mockup of the Vintage Air evaporator to verify that it would fit, and it appears that it will, so I ordered it yesterday.

Still working on the wiring diagrams so I can order parts for that project.

Monday, February 8, 2016

Time to Think About Wiring


Windy and cold today, so I’ll stay in the house see if I can find a way to merge hookup information from the several Mopar makes and models and aftermarket parts into one understandable wiring diagram. First efforts tell me this could take some time, and since I usually play background music when I’m thinking, I’ll share one of my favorites from the Righteous Brothers.