Vent Windows and Stuff

Once the paint covered all the bare primer, it was amazing how much more inspired I became! Okay, so there is still a lot of color sanding to take care of, but there is also a lot of trim and seals that can be installed now.

The vent window assemblies were complete less the glued-on rubber seals, so I finished that part and began installing the windows. It was another visual accomplishment to fuel my enthusiasm.

To fuel it a bit more, I decided to make the back end look more finished, and the bumper, splash shield, and hinged license plate frame/gas-fill cover are now in place. The trunk lock and pot metal “V” passed a fit-check, but must wait to be fastened in place after color sanding the trunk.



Today, some of the last chrome parts went to the re-plating shop today. I should have brought them in earlier as I just realized the stainless-steel window frames will have to be attached to the glass before I can install the power windows.

Last week I ordered the mufflers and tailpipes from Waldron. I should have ordered them earlier too, as the quote is 8-weeks for delivery. They have the tailpipes in stock, but the mufflers are made in Canada and their factory just reopened after being closed for the virus, so I guess it wouldn’t have done any good to order earlier!

Exhaust pipes will have to be fabricated at a later time in a local shop, so my plan is to temporarily install flex-pipe so I can start the engine and sort out all the inevitable problems that are waiting to surprise and frustrate.

I look back at the last ten years of dreaming, designing, repairing, fabricating, learning, and changing nearly every part and I realize that only the basic sheet metal shell is anywhere close to stock, and it too has been massaged and/or altered functionally…if not so much visually.

Inside, the changes are even more extreme from floorboards to headliner, and everything in between. About the only things recognizable to a stock ’56 Plymouth owner would be the control knobs on the dash, but I hope I will have been able to make the changes look like they might have come from the era.

Paint Progress!

Yes, most of the car is finally one color! A few days after the D-Day celebration, I celebrated P-Day, and that is indeed worth celebrating!

I’ve not been able to post for a week as my Internet service crashed last Thursday and didn’t return until today. Online tech support couldn’t figure it out and the local technician couldn’t come out until today.

The problem was initiated by a robocall that bypassed my answering machine and tried to leave a message at the phone company, and that locked up the automated system. Then when online tech support tried to fix the mess, they corrupted the troubleshooting program. Fortunately, the tech that came out had just finished fixing the same problem for two of my neighbors, so I was back online in a few minutes.

The weather cooperated nicely the last several days and I was able to paint the fenders, doors, hood, and front gravel pan. The trunk lid a rear gravel pan are left to paint, but I hadn't properly mounted the trunk lid and had to wait for that before painting.

I'm satisfied with everything except the hood and I had been worried about it since day one. The underside surface was pitted, and it needed several patches to strengthen the supporting structure. It looked like crap after painting, but I wasn’t about to take too much time to make that part look nice, since the pad will cover many of the worst areas.

The top surface had also been damaged extensively by hail some years ago and I did a poor job of leveling all the tiny dents. Some can be removed by color sanding but I’m quite sure it will require more filling, leveling and repainting to look acceptable for even a daily driver. At least I will be able to finish the doors and fenders and then mount much of the exterior trim. If necessary I will locate a better hood to restore.

Anyone who has assembled a ‘56 grille knows what a pain it is to adjust all the parts to achieve a good fit, but I managed to accomplish much of that today, and it came out okay, if not perfect.

The paint will have to cure for another day before I can begin color sanding and it will be nice to get that part of the job done. I think I have enough sandpaper, but I’ll need to order a new buffer pad before I can finish final polishing.

I can’t wait to get back to the interior again!

P-Day Coming Soon?

The weather is nice with no rain expected for a couple of weeks and my latest homeowner repairs are complete, so maybe P-Day…Paint Day…is finally in sight!

I finished filling the last of the tiny dings and dents, and the last touch-up coat of high-build primer will go on tomorrow, so  with a little more sanding I should be ready to paint early next week.  Then a couple of days to clean, dust, prep and re-mask, and it will be time for me to quit procrastinating and take the big step!

Since I have to paint inside the garage without a booth, the roll-up door will have to be open to ventilate the fumes. I'll need a day with moderate temperatures with light winds from the west or northwest, and if the ten-day forecast is anywhere close to accurate, it looks like June 10^th will be in the middle of several days suitable for spray painting.

Keeping my fingers crossed!

After the Haunting

I'm beginning to think my house is haunted, or maybe it's related to the '41 Chevy that was my first car in 1955. When the old Chevy wheezed its last, I filled it full of bullet holes, so the house better pay attention!

I might not be fighting ghosts and demons, but considering everything we did to build in extra-high quality, I'm really fed up with our custom built house. In the seven years since we moved in, nearly every mechanical device in the kitchen has failed, as has the HVAC many times.

The latest failures have been the HVAC that now needs a new coil due to a leak. It is the second one to need replacement in two years. It was also repaired and several parts replaced while under warranty, and has never functioned the way their manual states.

Three backyard flood lights also crapped out in the past three weeks and the built-in microwave died three weeks ago. This was within a couple months of the death of the third ice machine, the clothes dryer, the dish washer, and the kitchen sink faucet. Yesterday, one of the garage door openers malfunctioned, but apparently my cursing helped as it seems to have at temporarily repaired itself. At least I can hope.

Oh, yes, the new mower blades and platform belt  arrived and I got the old mower running again. After waiting for five inches of rain to dry enough to get my soggy acre of grass mowed, I think I might have caught up with the trials and tribulations of home ownership!

Today, I managed to apply a couple coats of high-build primer on the doors and fenders. Maybe I can do the same on the hood and trunk lid this week so I can have everything ready for paint...if the weather cooperates and the house doesn't self-destruct again.

I tried something different when I applied primer this time. The vendor instructions say the high-build product can be applied with a roller, and since I have yet to build a temporary paint booth I thought I'd give the roller a shot. It was a much easier and less messy to apply, but  I'll try sanding a little bit tomorrow to see how it looks.

Another Scandinavian Forward Look Project

First up was Ray's Canadian '56 Plodge, while yet another '56 station wagon project belongs to Geir, a Forward Look enthusiast from Norway. The basic trim level will be upgraded by adding parts and pieces from a Belvedere, and maybe some custom interior parts. Sort of like mine, he hasn't decided exactly what all he wants to incorporate, but that early Dodge Hemi should be a perfect fit.

I envy this rotisserie! If I had it to do over again, it would be the first tool I would have purchased. I could have saved hundreds of hours when I was replacing floors and trunk panels.

He still has a lot of work left on the wagon, but he also owns this beautiful Savoy sedan.

Invitation to my Readers

Geir, Ray, and anyone else with a '55 or '56 Mopar project, pictures are always welcome and I hope you will share them with us. I've posted a few guest photos in earlier entries, but as your projects progress it's fun to see what you've accomplished. I don't discriminate if it's a serious restoration, a wild custom, a hot rod, or a Mopar mutt, like mine. If you'd like to tell us all about your car, that's also fun to read.

Just email your photos and text to GaryS1941@gmail.com and I will post them here. For starters, here are a few pictures of Ray's '56 Plodge wagon with a Dakota clip, modernized drive train and an impressive and plush interior.

Hood Installation

One more visible task completed!  Thanks to the damn virus quarantine, there was no one I could call to help with the hood installation, so once again I had to muddle through the job alone, but at least it's now in place.

I had to mount another support hook in the ceiling so I could suspend the hood from a rope. It only took an hour to get it close enough to install the bolts, and another three or four hours to make all the adjustments. I only have to fill and sand two small dings near the hood ornament mounting holes, and the body will be ready for primer, final prep and paint. I'm not sure if I want to mark the mounting locations so I can remove the hood before painting, or if I want to paint it while in place. If I was sure I would have help after painting, it would be easier to spray and color sand, but if doing it alone again, I'm scared that I might scratch or chip the new paint. Decisions, decisions!

Now, if I can get a paint booth built so I will be ready to spray if the weather ever decides to cooperate.

Not that anyone would notice, but I took these pictures before making adjustments, so the gaps are not even. All in all, it came out nicer and with fewer adjustment issues than expected.

Summerfall-Winterspring

Our recent weather reminded me of the pretty young woman who played the character by that name on the old Howdy Doody TV show back in prehistoric times!

Along with storms and heavy rain, we had lots of wind every day, some sun, and temperatures that reached nearly 90F on one day last week, but I had to cover my patio plants last night as it was 37F when I went to bed and light frost was threatened!

My biggest project during this crazy spring weather was getting the hood prepped for paint. The under side was in much better shape than the outside. Underneath, all I had to do was de-rust and fill the dozen or so deepest pits, followed by a coat of primer, to get it ready for epoxy primer and paint.

The top side was badly pitted over most of the hood, and some were getting fairly deep. I spent a couple of hours and several sanding  before I can prime. There is no doubt in my mind that if the car ever gets on the road and spends any time outside in the weather, I'll be looking for a more solid replacement. In the meantime, since I have yet to make a temporary paint booth, I wait for weather nice enough to paint outdoors.

We're also sitting around waiting for the all-clear to get back to life as we know it. This morning I dug out the old barbering tools last used over twenty years ago. I gave myself a haircut and it actually looks okay, but then I can't see the back very well so maybe I shouldn't brag too much. At least it was the cheapest haircut I've had in a long, long time!

About the only business that remain open are those selling food and fuel and a few things they deem critical.

Oh yeah, I almost forgot. I need to replace the charcoal filters on my painting mask, and no one online has them to sell and say it will be June before they expect any. Mine have not been used that much, but it's been quite a while since I sprayed epoxy and I don't like using old filters that might be harboring bacterial growth. Not sure if there is an effective way to sterilize them before use.

1956 Chrysler 300B Infineon Raceway

Not a Plymouth, but clearly the king of real stock car racing in 1956. It was a time when fans could see cars that raced on the track began life in a factory. Okay, the teams made a few modifications, but the cars were  mostly stock, unlike the purpose-built, NASCAR designed common-silhouette product today.

I love watching the big Chrysler catch and pass all those sports cars!

Monsoon Season and Avoiding the WuFlu

I hope everyone has successfully avoided a visit from the nasty pandemic virus. So far, no one I know has been hit by it, but it struck a local nursing home and a resident facility for the mentally challenged. There are multiple cases in both places and the entire county is now under stay-home orders.

We had already been voluntarily staying home for two weeks and I thought I'd be able to find a lot of time to work on the car, but no such luck. I got back to work preparing the remaining sheet metal for paint, but it only lasted a day or two until heavy rains pounded the area for the better part of a week. My gauge registered over five inches in a three-day period and eventually totaled over seven inches in a week, so much of my yard is still under water and I can't even cut the grass, and boy does it need cutting! .Of course, the horrible humidity put a stop to body work, and the latest forecast doesn't look encouraging until several days into April.

When the rain finally quit and brisk winds dried out the air somewhat, I got back to sanding and priming but non-essential stores have been ordered to close due to the virus, and I needed some like 80-grit sandpaper and spot putty. With no local source to buy from, I had to order online. Amazon Prime has always been good about getting things to me in a very short time, but then I discovered that they were delaying shipment of things they deemed to be non-essential.  The day I placed the order, they said everything would be here within 48 hours, but when the order didn't arrive by the time quoted, I was notified that it would be another two days. It actually took a week, so there was very little body work going on.

I did manage to get the rear gravel shields ready for paint, and the front one is getting close, so I guess I'm one step closer to having the exterior parts all one color.